How to Remove Grout with Oscillating Tool

f:id:oscillatingtooltips:20200526215423p:plain
Grout removing is a work that you may think is too tough. But, trust me, it is so easy and will take very little time to remove grout from your tiles with an oscillating tool.

If you are about to clean your tile grout manually by your hand can take a huge part of the day. An oscillating tool can help you to do this in a very short time. Besides that, the oscillating tool is easy to handle, versatile, and perfect for working in a small space. In this article, I am going to show you how to remove grout with an oscillating tool.

 

Removing grout with an oscillating tool

f:id:oscillatingtooltips:20200526215559p:plain
In the following article, you will come to know why and how you can remove grout from the tile using an oscillating tool:

 

Why it is important to remove grout?

f:id:oscillatingtooltips:20200526215627p:plain
Before you jump into the work, let’s take a look at why it is important to remove grout from tiles:

  • Remove grout to safely extract a tile- before you replace a cracked or broken tile, you must start with removing the grout that borders the tile. This has to be done so that the neighboring tiles don’t get damaged while removing the broken one.
  •  Changing the look of the room- it is very easy to change the look of your room by just changing the color of the grout. Even if you count the cost of the new grout and grout removal tool, it will be lesser than buying new tiles.
  • Fixing cracked or damaged grout- this is a very common reason why people want to remove grout. Grout can be cracked, damaged, or heavily contaminated by dirt. This type of problem occurs, especially in the shower room. Grouts generally heavily damaged or washed away there. Removing the old ones and applying fresh grout there is the best solution you can have.
  • Removing odor near pet areas- your pets can sometimes pee inside your house and no matter how hard you scrub or steam clean your floor, urine can get inside the grout and start smelling bad. The best way to remove this odor is by replacing the grout with a new one.

These are the main reasons why people want to remove grouts between tiles. There could be more and different types of reasons. No matter what is the reason behind it, the only easiest and cost-effective way to remove grout is by doing it with an oscillating tool.

 

Gears you will need

f:id:oscillatingtooltips:20200526215733p:plain
It is better to start your task equipped with some gears. Some of them are optional and you can skip them if you want. But some of them are very essential. Let’s take a look at the gears that you may need:

  • Vacuum cleaner (wet/ dry) - you will need a vacuum cleaner for grout removal tasks. This is the best way of sucking up all the grout dust and that you will create while removing the grout. You may need to have the wet capabilities for any work in showers or if you want to pre-wet the grout before removing them.
  • Work gloves- a good pair of working gloves will increase your grip over the oscillating tool. It will also protect your hands from the long periods of vibrations that the tool will produce.
  • Earmuffs- the buzzing sound of an oscillating tool inside an echoic room like a bathroom is quite unsafe for your ears. A good quality ear muff pair can protect your ears from this.
  • Knee pads- you need to kneel for sometimes over your knee. That will give a lot of pressure on your knees. To avoid this situation, you can use a pair of workers' knee pads.
  • Grout removal blade- you must equip your oscillating multi-tool with a grout removal blade. 

 

Removing the grout

www.youtube.com

If you are removing grout with an oscillating tool for the first time, it is better to start from an area that is less conspicuous such as behind a door or a far corner of the room.

Now, grip the oscillating tool comfortably and place it on the grout line that you are going to start with. Once you place it on the spot, start with a low-speed pass of a few inches. Slowly get deeper. The deeper your blades will go, the faster you can go. If You are interested in wood carving then you can read this article Dremel for Wood Carving.

In my opinion, the best way to remove grout from tile is to apply gentle pressure and let the tool do most of the work. When you have removed most of the grout by straight cut, now you can slowly angle the blade up and down to remove more of the grout from the seam. Be careful and don’t damage the edges of the tiles. After that, you can remove the remaining grout by a screwdriver or a knife.

 

Final verdict

Whatever oscillating tool you use, the process of removing grout will be the same and it will take some time and effort to do it. But it will be very less when you will compare doing it manually. That means the right tool for removing grout can make a significant difference. So, if you are looking for the best way to remove grout from tiles quickly and with ease, an oscillating tool is the best tool for your job. I hope my instructions will help you to do your grout removing job perfectly and easily.

Oscillating Tool Tips and Tricks: How Can You Use it Efficiently

f:id:oscillatingtooltips:20200526191221p:plain
You are reading this article that means you already know about the oscillating tool and you are about to use it. An oscillating tool is a multi-functional and multi-purpose tool.

No matter from which profession you are, this awesome tool can make your work more easy and smooth. It will become more effective when you know the proper technique of using this tool. Don’t worry; I am bringing some very useful tips for you here to use this tool efficiently.

 

Using an oscillating tool efficiently

f:id:oscillatingtooltips:20200526191440p:plain
You need to know the correct tips and tricks to unleash the real power of an oscillating tool. In this article, I have come up with some interesting and useful tips and tricks about using an oscillating tool more efficiently.

 

Working procedure of an oscillating tool

f:id:oscillatingtooltips:20200526191515p:plain
The main principle of the oscillating tool is side by side movement. While doing this, there is a very slight oscillation of about 3 degrees. But it makes very fast strokes and that is about 350 strokes per minute.

This is the main reason why you feel the tool is vibrating. One more thing, you can frequently use scrapers and sanding pads with the oscillating tool if you need them for your work.

 

Tips and tricks for oscillating tool

f:id:oscillatingtooltips:20200526191556p:plain
Here are some tips and tricks to use an oscillating tool efficiently:

 

Use the exact blade for your work

f:id:oscillatingtooltips:20200526191621p:plain
Using the right blade for your work is the key factor. It will make your work easier.

Most people use an oscillating tool in cutting hard surfaces. For that reason, some sorts of blades are involved in the tool itself. 

There are variations in blades. Among them, two major blades are straight blades and round blades. A straight blade is the best option for work like plunging.

On the other hand, round blades have their perks. You can mostly use them in linear cutting which is quite long. When you need to make a long cut but in a straight line and every micro inch is in the count, a round blade is a perfect fit.

 

Corded or cordless

f:id:oscillatingtooltips:20200526191659p:plain
In these days, you will see both corded and cordless version of almost every power tool which you can carry in your hands. I will not be surprised that you will love to choose the second one.

But wait a minute before you make your mind. Corded oscillating tools have their effectiveness though you have to deal with tangled wires with it. Corded tools are most cost-effective, light in weight and sometimes they can provide you with more power.

On the other side, a cordless tool is the best option when you consider a hassle-free operation. When the work-site has no power supply option, there is no other option than working with a wireless oscillating tool.

 

Make sure you get an easy-to-handle device

f:id:oscillatingtooltips:20200526191738p:plain
Oscillating tool users like me is very much concerned about comfort in operation. And it is the point where you the fact about switch panel come in.

The switch panel is the main operating panel of the tool. It lets the electrical power flow through the motor of the tool. There are mainly two types of switches- the sliding switch and the press switch. I would recommend you to go for the sliding type switch as it is more convenient to use than any other version.

 

Make faster cuts on the floor

f:id:oscillatingtooltips:20200526191807p:plain
Floor cutting is one of the regular uses of an oscillating tool. Whether you are cutting an old floor or preparing the new floor, an oscillating tool is the most important tool that you need.

A flush-cutting technique is the faster way to do floor preparation. You will feel like driving a knife inside butter. In this way, you can make a clean, clear, and straight cut.

 

Cutting rusty faucet nuts

www.youtube.com

It is very hard to pull off the rusty nuts even with the best basin wrench. At this point, a reciprocating saw can be very useful but that is not a good idea when there is not enough space to use the saw.

At this critical time, an oscillating saw tool can be very useful. A bi-metal cutting blade attached with the tool can easily pull off the rusty nut. At first, angle the oscillating tool against the nut and start at a slow speed. Gradually increase speed. At last use a plier to break the rest of the nut.

 

Scrapping away gunk

f:id:oscillatingtooltips:20200526191958p:plain


With the help of an oscillating tool, you can easily get rid of construction adhesive patches, stubborn dried joint compounds, and other gunk. If you want to clean your home then you can go there vacuum cleaner labs.

To do this task, you just need to equip your tool with a scraper blade. It is better than using a knife to do this because that will take more time and effort to complete the task.

 

Conclusion 

In the above article, I have shared some very important tips and tricks about an oscillating tool. There are a lot of other possibilities you can apply to your oscillating tool. But I am sure from the above tips you will become very much benefited.

So, follow the tips and you will be able to use your oscillating tool more efficiently.

Projects You Can Do with an Oscillating Multi-Tool

f:id:oscillatingtooltips:20200526155243p:plain
The oscillating tool has become very popular among DIYers and professionals. The main reason for the popularity of this tool is that it can handle various kinds of projects. 

You can easily cut, grind, sand, polish, scrap, and do many more things with the right oscillating tool blade. An oscillating tool is very easy to use and small in size. That’s why it can be very handy in small spaces where power tools cannot work. In the following article, I will talk about some projects that you can do with an oscillating tool.

 

Oscillating multi-tool projects

f:id:oscillatingtooltips:20200526155329p:plain

Whether you are a DIYer or a professional and thinking to buy an oscillating tool, here are some projects that you can do with this multi-tool:

 

Trimming door casings with oscillating multi-tool

f:id:oscillatingtooltips:20200526155356p:plain

If you want to trim the bottom ends of your jambs and door casings and want to fit them properly with your new floor installation, just close your eyes and go for an oscillating multi-tool. An oscillating multi-tool is an ideal tool to handle this kind of job and the best thing about it that, you don’t have to call a repairman to do this.

You need to attach a flush-cutting wood blade to your oscillating tool. After that, place a piece of your new flooring on the subfloor very close to the door casing and then turn it upside down. It will help you to prevent scratching the good side of the flooring and will also help you to determine the height to which you need to cut.

Now, cut directly into the door casing and then cut from one end to another. Now your new flooring will easily slide under the door casing just after you trim and remove the severed piece of wood.

 

Removing old paint with oscillating multi-tool

f:id:oscillatingtooltips:20200526155547p:plain

Paint removal is one of the most common DIY projects. An oscillating multi-tool can easily do this task and can give you better results. Removing the old worn-out paint is the best way to give your home a new look but removing it by hand can consume a lot of time and effort.

You can start the task by using a rigid scraper to remove the paint. After that, switch to a sanding pad to smooth the surface. It is better to start the sanding activity by using coarse-grit sandpaper and gradually progress to finer abrasive until you get your desired smoothness.

 

Grout removing

f:id:oscillatingtooltips:20200526155610p:plain

Removing grout is another common DIY task. When you are looking forward to regrouting your bathroom, an oscillating multi-tool can make the task of removing old grout easier. You can also read this article's central vacuum powerhead.

 

If your project is small, a carbide oscillating tool blade should be fine for your job. But, when you have to do a lot of work and have to remove a lot of grout, it is better to go for a diamond grit blade for your oscillating tool. They are a bit costly but it will make your task easier and will last longer than other blades.

 

Remove old trim with an oscillating tool

f:id:oscillatingtooltips:20200526155728p:plain


You may have seen that it is very difficult to take off old trim and molding without causing any damage. But with the help of an oscillating power tool, you can do the job easily and prevent damages.

You just need to pry the trim away from the surface and then use a metal oscillating blade to cut away the finish nails. You will be able to remove the trim in a very short time and the bonus is, it will be in good condition and you can re-use it. 

 

Seamless pipe cutting with an oscillating tool

www.youtube.com

An oscillating tool is a right tool for cutting pipes. With the help of right oscillating blades, you can cut through copper, plastic, or even galvanized pipes. The design of the oscillating tool makes it best when you have to make cuts in small spaces or on corners.

 

Remove rust on the metal surface

f:id:oscillatingtooltips:20200526160112p:plain

It has become very easy to remove and clean off the rust from mistreated metalwork with the help of an oscillating multi-tool. It will restore your old rusting tool to its former glory.

You can also remove the rust from your old metal garden gate before applying a fresh coat of paint on them.

All you need to do is just attach the sanding pad to the tool and get down to business. The high speed of your oscillating tool will do the job in a very short time.

 

Conclusion 

I think now you are clear how useful an oscillating tool can be. It is one of the most versatile tools that you will ever own. An oscillating tool will help you to handle your tasks perfectly and accurately and you will be able to do them quickly and efficiently.

In the above article, I have described to you some of the projects that you can do with an oscillating tool but the uses of it are not limited to this. With the right type of attachments, an oscillating multi-tool is capable of doing a lot of other tasks also. I hope you can complete your project with an oscillating tool easily and efficiently.

Contact Us

f:id:oscillatingtooltips:20200526152157p:plain


If there are any questions you may contact us using the information below.


Email   : lollmancd@gmail.com
Phone   : +1 310-809-4313
Address : 2872 Valley Road Gardena, CA 92145

About

f:id:oscillatingtooltips:20200526150739p:plain

For individuals who don't know, woodworking is a lot of abilities or art that empowers individuals to make things out of wood. In addition to the fact that it is fun makes time pass by much faster. Also the cleansing properties of this specific aptitude. Likewise, there is another aptitude that is known as woodturning, very like woodworking however there are a couple of devices that contrast so you ought to consistently look into Wood Turning instruments you ought to have on the off chance that you are keen on that. Be that as it may, we will discuss the sorts of woodworking, they are primarily arranged into two kinds for example accuracy woodworking and creation woodworking. Accuracy woodworking, as the name as of now, recommends manages the moment subtleties and in woodworking, through creation woodworking manages items that are made utilizing arrangements and make the activity much snappier since subtleties are not included. In the event that you are searching for online courses for woodworking, we would strongly suggest that you look at Teds Woodworking Advanced Course.